Skip to content
Top Tier Technical Services

Apartment Handover Checklist: What to Check Before You Move In

By the Top Tier Technical Services team · Published · 7 min read

Empty apartment room with a carpet and a balcony window ready for handover

Quick answer

Before you move in, inspect the apartment with the landlord or agent, test the AC, taps, drains, sockets and doors, and photograph every defect. List the defects in writing and agree who fixes them. Dubai's tenancy law requires you to return the property as you received it, apart from ordinary wear and tear, so a dated record protects you.

Key takeaways

  • Article 21 of Dubai Law No. 26 of 2007 says tenants must return the property in the same condition they received it, except for ordinary wear and tear.
  • A dated record of the condition at handover, with photos and a written defect list, is your evidence if there is a dispute at move-out.
  • Article 16 makes the landlord responsible for maintenance and repairs unless the contract says otherwise, so raise any defects you find at handover before you move in.
  • DEWA requires an Ejari number from tenants to activate electricity and water.

Why does a handover inspection matter?

The condition you record on day one decides what you are responsible for on the last day. Article 21 of Dubai Law No. 26 of 2007 says the tenant must hand the property back in the same condition in which they received it, except for ordinary wear and tear. Without a record of the starting condition, an existing mark or fault is hard to separate from damage you caused.

Article 16 of the same law makes the landlord responsible for the property's maintenance and for repairing defects, unless the contract says otherwise. That is why it is better to raise problems at handover than to discover them after you have moved in.

What should you arrange before the inspection?

  • Ejari: DEWA requires tenants to submit their Ejari number to activate electricity and water, so make sure your tenancy contract is registered.
  • The tenancy contract and any inventory or condition report from the landlord or agent.
  • A phone or camera with enough storage for photos and a short video of each room.
  • The keys, access cards and parking fobs, and a count of each.
  • Time for the inspection. Do it in daylight, with the AC and water on.

What should you check room by room?

Entrance, doors and windows

  • Doors open, close and lock smoothly, with no rubbing or gaps. See why doors stick and swell if one drags.
  • Door handles, locks and the intercom work.
  • Windows and balcony doors slide freely, lock and have intact seals.
  • Count the keys and test each one.

Walls, ceilings and floors

  • Look for cracks, stains, peeling paint, mould and uneven patches on walls and ceilings. Stains on a ceiling can mean a leak above.
  • Check floors for loose, cracked or hollow-sounding tiles, scratches and damage.
  • Check skirting boards, cabinets and fitted wardrobes for damage.

Air conditioning

  • Run each unit on Cool and check it blows cold air within a few minutes.
  • Look for water dripping from the indoor unit, and listen for rattles or grinding.
  • Check the thermostat or remote works, and ask when the AC was last serviced.
  • Ask who is responsible for servicing and filters under the contract.

Kitchen

  • Run the taps, hot and cold, and check the water pressure.
  • Check under the sink for damp, stains or drips, and test that the sink drains quickly.
  • Test the hob, oven and extractor fan, and the fridge or dishwasher if the property includes them.
  • Check the cabinets, hinges and drawers.

Bathrooms

  • Flush the toilet, check it refills properly and doesn't keep running.
  • Run the shower and basin, check the drains empty quickly and there are no leaks around the fittings.
  • Check the water heater gives hot water, and look underneath it for rust or drips.
  • Look at grout and sealant for gaps and mould, and check the extractor fan.
  • Look for stains on the ceiling below or the wall beside the bathroom. Our guide on bathroom waterproofing explains what they can mean.

Electrical and safety

  • Test every light, switch and socket, for example with a phone charger or a plug-in socket tester.
  • Look at the distribution board. Press the test button on any residual current device and check it trips.
  • Press the test button on every smoke alarm. The National Fire Protection Association advises testing smoke alarms at least once a month.
  • Look for scorch marks, loose sockets and exposed wires.

Balcony and utilities

  • Check the balcony railing, floor drain and door.
  • Take a photo of the electricity and water meter readings, or the readings that appear on the DEWA account, on the day you move in.
  • Check for signs of pests, such as droppings or live insects, in the kitchen and bathrooms.

How do you record and agree the defects?

  1. Photograph or film every room and every defect, with the date on the file. Take wide shots and close-ups.
  2. Write a list of the defects, room by room, with what each one is and where it is.
  3. Send the list and photos to the landlord or agent by email or message, so there is a record of when you sent them.
  4. Agree in writing who will fix each defect and by when, before you move in where possible.
  5. Keep a copy of everything, and a copy of the agreed list with the tenancy contract.

Don't start repairs yourself without permission. Article 19 of Dubai Law No. 26 of 2007 says tenants may not carry out maintenance works without the landlord's permission.

What if you are buying a new apartment rather than renting?

The same room-by-room checks apply when you take handover from a developer, but the rules are different. Your rights on defects depend on your sales agreement and on Dubai Land Department and RERA rules, so check them before you sign a handover certificate, and consider a professional snagging inspection. We have not quoted warranty periods here because they should be confirmed against your contract and the current regulations.

Our apartment maintenance service fixes the defects a handover inspection finds, from AC and plumbing to electrical and small repairs, and our handyman service covers fittings and touch-ups. To book a visit, contact us.

Frequently asked questions

What should I do if I find defects after I have moved in?

Report them to the landlord or agent in writing straight away, with photos, and keep a copy. Under Article 16 of Dubai Law No. 26 of 2007 the landlord is responsible for maintenance unless the contract says otherwise.

Do I really need to photograph everything?

Yes. Dated photos and a short video of each room are the strongest evidence of the condition you received, and they cost nothing. Ordinary wear and tear is allowed at the end of the tenancy, but damage is not.

Who pays for repairs found at handover?

Unless the tenancy contract says otherwise, the landlord is responsible for maintenance and repairs under Article 16. Agree in writing who will fix each defect and by when.

Can I fix things myself before moving in?

Not without permission. Article 19 says tenants may not carry out maintenance works without the landlord's permission, so ask first and keep the reply.

How do I activate DEWA when I move in?

DEWA requires tenants to submit their Ejari number for its move-in service. Make sure the tenancy contract is registered with Ejari before you move in.

Sources

  1. Dubai Law No. (26) of 2007 regulating the relationship between landlords and tenants (Dubai Legislation Portal)
  2. DEWA: Activation of electricity and water (move-in)
  3. NFPA: Smoke alarms at home safety tip sheet

← More maintenance guides

Get Started

Request a Free Quote

Tell us what you need and we'll get back to you with a clear quotation — no obligation.

Submitting opens WhatsApp with your details pre-filled, ready to send to our team.