Symptom and Pipe Mapping
We ask where the damp is and map which supply, drain or hot-water pipes pass behind it.

Leaks behind walls and under floors traced before anything is opened
In Brief
Hidden pipe leak detection is finding a leak in a pipe that runs inside a wall, floor or ceiling, without breaking open surfaces at random. We narrow down the location using the symptoms, moisture readings and pressure testing, then open only the spot that needs repair.
A leaking pipe you cannot see rarely announces itself clearly. The early signs are indirect: a water meter that moves when nothing is running, a damp patch, peeling paint, a musty smell, a warm spot on a floor, or a bill that is higher than usual. By the time water shows on a surface, it may have travelled some distance from the actual leak along the pipe or through the slab.
We work from the symptoms backward: which pipes run behind the damp area, whether the supply or the drainage is leaking, and whether the water is hot or cold. Moisture readings and pressure testing help confirm the section of pipe, so we open the smallest area possible, repair or replace the pipe, and tell you what else we noticed. If the leak affects a neighbour, we help coordinate with building management. Our main leak detection page covers the whole service, and a leak that comes from the AC is covered by AC drain line clearing.

We ask where the damp is and map which supply, drain or hot-water pipes pass behind it.
We check whether water is being lost from the supply and use pressure tests to narrow down which line is leaking.
Readings on walls, floors and ceilings help locate where the moisture is strongest, which is usually closest to the leak.
We open only the area that needs it, so repairs to walls, tiles and finishes are kept as small as possible.
The leaking section of pipe or fitting is repaired or replaced and the line is tested again.
You get a clear explanation of the cause, what was repaired, and any damage that needs finishing, such as plaster or paint.
Tell us what you have noticed and where, and send photos of any stains or damp patches.
We check the water meter and test the supply lines to find out whether the leak is on the supply or drainage.
Readings and testing narrow the leak to a short section, and we open the smallest area to reach it.
The pipe is repaired or replaced and tested, and we explain what finishing work remains.
Every property is different, so we confirm the price before any work starts. These are the things that most often change the time and cost.
A water meter that moves with everything off, unexplained damp or stains, a musty smell, a warm floor or a sudden rise in your bill are all signs. We can check the meter and test the lines to confirm.
We trace the leak first and open only the spot that needs it, so damage to walls and floors is kept as small as possible.
We help coordinate with building management so the leak is traced and repaired quickly, and we explain what we find.
It depends on how the leak shows itself and how much opening-up is needed. We explain the work and confirm the price before starting.
Get a free quote today and let our expert technicians bring reliable hidden pipe leak detection to your Dubai property.
Get a Free QuoteTell us what you need and we'll get back to you with a clear quotation — no obligation.