Setting Out the Wall
We mark the wall line from your plan or agreed layout and check it against doors, services and the ceiling.

Lightweight partition walls built quickly, cleanly and ready for finishing
In Brief
A gypsum partition is a non-structural wall built from a metal-stud frame covered with gypsum board on both sides. It divides a space quickly and cleanly, can include insulation and openings for doors and services, and leaves a smooth surface ready for paint. It is widely used in offices, apartments and villas.
Gypsum partitions are a practical way to divide a room, create an office, add a bedroom or box in services. We build them from a light metal frame covered in boards, so they go up faster and with less mess than block walls, and they are light enough for many floors to take without extra strengthening. They also leave space inside for cabling and insulation.
We set out the wall position, fix the floor and ceiling tracks, erect the studs, run any cabling or services through the frame and add insulation where needed. Then we board both sides, joint and finish. We frame openings for doors and glazing properly so they hold. Partitions are not structural, so we avoid changing load-bearing walls and advise if a professional needs to confirm a proposed layout. They go hand in hand with false ceilings and layout changes. The overall service is on our gypsum false ceiling page.

We mark the wall line from your plan or agreed layout and check it against doors, services and the ceiling.
We fix the floor and ceiling tracks and erect metal studs at the right spacing, plumb and straight.
We place cables, pipes and backing for fittings in the frame before closing it up.
Insulation can be added in the cavity where privacy or comfort calls for it.
Boards are fixed on both sides, joints taped and finished flush, ready for painting.
We frame the openings for doors and glazing so they are strong and square.
Send a plan or photos with measurements, and tell us where doors, sockets and services need to go.
We mark out the walls, check against services and confirm the price before starting.
We erect the tracks and studs and put in the cabling, insulation and door frames.
We board and joint both sides and leave the walls ready for painting.
Every property is different, so we confirm the price before any work starts. These are the things that most often change the time and cost.
Yes, if we plan the fixings. We can add backing inside the frame where heavy items will hang, so tell us in advance.
They reduce sound more than many people expect, especially with insulation in the cavity, but they are not as solid as a block wall. We advise on options if privacy matters.
Humid or wet areas need a moisture-resistant board and finish. We tell you what suits each room.
In rented properties, check with your landlord. In managed buildings, follow the building's rules for alterations. We can discuss what you are likely to need.
Yes, more easily than block walls, which is one reason they suit offices and changing layouts.
Get a free quote today and let our expert technicians bring reliable gypsum partitions to your Dubai property.
Get a Free QuoteTell us what you need and we'll get back to you with a clear quotation — no obligation.