Confirming the Leak Is Fixed
We check that someone has found and repaired the cause, and that the area is dry, before any ceiling repair starts.

Water-damaged ceilings patched and finished once the leak is fixed
In Brief
Ceiling repair after a leak restores a stained, bubbled, cracked or soft gypsum or plaster ceiling once someone has fixed the source of the leak and the area has dried. We cut out the damaged board, fit new board, finish the joints and prepare the area for painting to match the rest of the ceiling.
Water damage on a ceiling looks different depending on how long the leak has run. A fresh leak gives a brown stain. A longer one can make paint bubble, plaster flake, gypsum board sag or go soft, and mould spot. The repair depends on how far the damage has spread, and none of it should start before someone has found and stopped the leak.
We start by checking that someone has fixed the source and the area is dry; if it is not clear where the water came from, we trace it first, as described in ceiling leak tracing. Then we remove loose, damaged or soft material, cut out and replace board where needed, patch and joint, and finish the surface so it blends with the surrounding ceiling. Painting afterwards completes the job, and our painting team can do it. If the whole ceiling needs replacing, see false ceiling installation. The wider service is on our gypsum false ceiling page.

We check that someone has found and repaired the cause, and that the area is dry, before any ceiling repair starts.
We remove loose paint, flaking plaster and soft or sagging board back to sound material.
We cut out the damaged board in a neat shape and replace it with new board fixed to the frame.
We tape and joint the patches flush with the surrounding surface and fill the cracks.
We seal stains with a suitable stain-blocking primer and treat any mould before finishing the surface.
The repair is finished to match the existing texture, ready for painting to blend with the rest of the ceiling.
Send photos of the stain and tell us when the leak happened and whether someone has fixed it.
We confirm the leak has stopped and the area is dry, and tell you if it needs more drying or tracing.
We remove the damaged material, fit new board, and patch and joint the area.
We finish and seal the surface ready for painting, and explain what else it needs to blend in.
Every property is different, so we confirm the price before any work starts. These are the things that most often change the time and cost.
Not until the leak is fixed and the ceiling is dry. Even then, stains often show through unless you use a stain-blocking primer first.
Not usually. We can cut out and replace damaged sections. If the damage is widespread, we tell you and discuss replacing larger areas.
We treat it before finishing, and we find out why it formed, usually moisture that should be dealt with.
We finish patches to match the surrounding surface as closely as we can. Painting the whole ceiling gives the most even result.
Wait until the leak is fixed and the area has dried, because repairing too early can trap moisture. We check this before starting.
Get a free quote today and let our expert technicians bring reliable ceiling repair after leaks to your Dubai property.
Get a Free QuoteTell us what you need and we'll get back to you with a clear quotation — no obligation.