Checking and Preparing the Base
We check the floor for level, cracks, damp and dust, and repair or clean it so the tiles have a sound surface.

Floors prepared, levelled and tiled flat with even joints
In Brief
Floor tile installation is laying tiles on a prepared, level surface with the right adhesive, even spacing and a clean grouted finish. Most failures, such as lifting, hollow tiles and cracked grout, come from poor preparation, so the work starts with checking and levelling the floor, not with the first tile.
Tiling looks like the easy part of a floor, but the result depends mostly on what is underneath. A floor that is uneven, dusty, damp or cracked will show through in the finished tiles: some lift, some sound hollow, and the lines of the grout wander. Large-format tiles, which are popular for living areas, need an especially flat surface, because they cannot hide small dips.
We check the base, repair and level it where needed, and plan the layout so cuts are balanced at the edges rather than squeezed into a narrow strip at one side. We bed the tiles in adhesive with the right trowel, space them evenly and check the level as we go, then grout and clean. We keep the floor clear until the adhesive and grout have cured. Our tiling service covers wall and floor work, and wet rooms need bathroom waterproofing before tiling. For later repairs, see tile replacement and repair.

We check the floor for level, cracks, damp and dust, and repair or clean it so the tiles have a sound surface.
We level uneven floors where needed, because tiles, especially large ones, show every dip.
We plan the layout so cut tiles sit sensibly at the edges and joints line up with doors and fixed features.
We lay the tiles in a suitable adhesive with the correct trowel, so they are fully bedded and not hollow.
We use spacers and check levels throughout, not just at the end, so joints and levels stay consistent.
Once the adhesive has set, we grout the joints, clean the tiles and protect the floor while it cures.
Send photos of the floor and the tiles you have chosen, and say the room size and what is under the tiles now.
We check the base and levels, agree the layout and confirm the price before starting.
We prepare and level the base, then bed, space and check the tiles as they go down.
We grout the joints, clean the floor and keep it clear while the adhesive and grout cure.
Every property is different, so we confirm the price before any work starts. These are the things that most often change the time and cost.
Sometimes, if the old tiles are sound, flat and firmly fixed. Often it is better to remove them. We check the floor and tell you which option suits.
The adhesive may not have fully supported them, or the base was uneven or dusty. Hollow tiles tend to crack or lift, and we can repair them. See tile replacement and repair.
Yes. Large tiles cannot follow dips in the floor, so the base must be flat, and we level it where needed.
It depends on the adhesive and grout used. We tell you how long to keep the floor clear before we start and when we finish.
We can fit tiles you have chosen. We confirm what is included in the quote before work starts.
Get a free quote today and let our expert technicians bring reliable floor tile installation to your Dubai property.
Get a Free QuoteTell us what you need and we'll get back to you with a clear quotation — no obligation.