Assessing the Surface
We check the material and condition of the doors or cabinets and whether spraying suits them.
Door and Cabinet Spraying in Dubai
Smooth, even coats on doors, frames and cabinet fronts
In Brief
Door and cabinet spraying gives doors, frames and cabinet fronts a smooth, even finish with no brush marks. We sand and prime the surface, mask everything that should stay clean, spray the coats and check the finish in good light.
Doors and cabinet fronts show brush and roller marks more than almost any other surface, because they are flat, close to eye level and handled daily. Spraying can lay a smoother coat, and it reaches the edges and mouldings of panelled doors that a brush can leave streaky.
Spraying needs preparation: old finish is sanded, dents filled and the surface primed so the coat bonds well. Overspray travels, so we mask and cover everything that should stay clean, and may spray in a prepared area or on site depending on the job. We advise whether spraying, brushing or rolling suits your doors. See door painting for the brush-and-roller option. The full service is on our spray painting page.
When You Need This
Signs You May Need Door and Cabinet Spraying
- Doors and cabinet fronts with visible brush marks or drips
- Panelled doors with mouldings that are hard to paint neatly
- Kitchen cabinets that look tired but are structurally sound
- A wish for a smooth, factory-like finish
- Several doors or cabinets to refinish in a consistent colour
What We Do
What Door and Cabinet Spraying Covers
Sanding and Filling
The old finish is sanded, and dents and gaps are filled.
Priming
The surface is primed so the sprayed coat bonds well.
Masking and Protection
Hardware, walls, floors and furniture are masked or covered before spraying.
Spraying
Coats are sprayed for a smooth, even finish, with colour advice if you need it.
Inspection
The finish is inspected in good light for runs and missed edges before we finish.
Our Process
How It Works
- 1
Send Photos and Sizes
Send photos and the number of doors or cabinets on WhatsApp, with the colour you have in mind.
- 2
Choose the Method and Quote
We confirm whether spraying suits the job and confirm the price.
- 3
Prepare and Mask
Surfaces are sanded and primed, and surroundings are masked.
- 4
Spray and Inspect
The coats are sprayed and the finish is checked with you.
Good to Know
What Affects Time and Cost
Every property is different, so we confirm the price before any work starts. These are the things that most often change the time and cost.
- The number of doors, frames and cabinet fronts
- The material and condition of the surfaces
- The colour change involved
- Whether pieces are sprayed on site or taken away
- The amount of masking needed around them
FAQ
Door and Cabinet Spraying Questions
Yes. We prepare, prime and spray doors and cabinet fronts, and can advise on a colour.
For large flat surfaces and detailed pieces it can give a smoother finish. For small areas or tight spaces, brushing or rolling is often better, and we will say so.
Yes. Overspray travels, so we mask and cover everything that should stay clean before spraying.
It depends on the job. We tell you whether we spray on site or take pieces away when we quote.
It depends on the number of pieces and their condition. We confirm the method, scope and price before work starts.
Need Door and Cabinet Spraying?
Get a free quote today and let our expert technicians bring reliable door and cabinet spraying to your Dubai property.
Get a Free QuoteGet Started
Request a Free Quote
Tell us what you need and we'll get back to you with a clear quotation — no obligation.