Fault Diagnosis
We run through the symptoms and test the machine to find the fault before any part is replaced.
Washing Machine Repair in Dubai
Drainage, spin and leak faults diagnosed and repaired
In Brief
Washing machine repair diagnoses why a machine will not drain, spin, fill or run quietly, or why it is leaking, and fixes the fault. We check the plumbing and electrical connections as well as the machine, and tell you honestly if repair is not worthwhile.
Many washing machine faults come from a few places: a blocked pump or filter that stops draining, a worn drum bearing or belt that makes noise and affects spinning, a failed door seal or hose that leaks, or a fault in the controls. The symptom usually points to the cause, which is why we diagnose before repairing.
We ask for the model and a photo of the fault first, then check the machine and the connections around it, since a slow drain or a loose hose is sometimes in the plumbing rather than the machine. If it is not worth repairing, we tell you. For blocked waste lines see drain cleaning. The full service is on our appliance repair page.
When You Need This
Signs You May Need Washing Machine Repair
- Water left in the drum after the cycle
- The machine does not spin or stops mid-cycle
- Water leaking onto the floor from the door or underneath
- Loud banging, grinding or squealing while spinning
- An error code appears or the machine will not start
What We Do
What Washing Machine Repair Covers
Drain Pump and Filter
The pump, filter and waste hose are checked and cleared where blocked or faulty.
Leaks and Seals
Door seals, hoses and connections are checked to find where water is escaping.
Drum, Bearings and Belt
Noise and spin faults are checked at the drum, bearings, belt and suspension.
Controls and Door Lock
Error codes, the door lock and control faults are checked and repaired where possible.
Connections Check
The water inlet, waste connection and power supply are checked, since faults can start there.
Our Process
How It Works
- 1
Tell Us the Problem
Send the model, a photo or video of the fault and any error code on WhatsApp.
- 2
Diagnose
We check the machine and its connections and tell you the fault and the repair cost.
- 3
Repair
With your agreement, we repair the fault and fit any parts needed.
- 4
Test
We run the machine to check it drains, spins and does not leak, then clean up.
Good to Know
What Affects Time and Cost
Every property is different, so we confirm the price before any work starts. These are the things that most often change the time and cost.
- The fault, and whether a part has to be ordered
- The make and model, and how easily parts can be found
- The age and condition of the machine
- Whether the plumbing or electrical connection also needs work
- Whether the machine is front-loading or top-loading
FAQ
Washing Machine Repair Questions
A blocked pump filter, a kinked or blocked waste hose or a blocked drain are common causes. We check each to find which it is.
It can be a worn door seal, a loose or split hose, a blocked filter or a failed pump. The place the water appears usually points to the cause, and we trace it.
It depends on the fault, the cost of parts and the age of the machine. If repair is not worthwhile, we will say so.
It helps, because we can then plan for likely parts. A photo of the label and a short video of the fault are usually enough.
It depends on the fault and any parts needed. We confirm the price before any work starts.
Explore More
More Appliance Repair Services
Need Washing Machine Repair?
Get a free quote today and let our expert technicians bring reliable washing machine repair to your Dubai property.
Get a Free QuoteGet Started
Request a Free Quote
Tell us what you need and we'll get back to you with a clear quotation — no obligation.